|
|
| Nested pairs of non-stainless steel pressure head |
|
Stainless Steel Two-Piece Sleeves provide the quickest, simplest way to make strong swaged turn-back eyes in wire rope.
Stainless Steel Two-Piece Sleeves allow for easy adjustment of eye size. Grommets, plain eyes, and tight thimble eyes can be made quickly and precisely.
|
型號 |
規格
(in) |
單重
(lb) |
W9042-13 |
1/2 |
0.2 |
W9042-14 |
9/16 |
0.31 |
W9042-16 |
5/8 |
0.3 |
W9042-19 |
3/4 |
0.5 |
W9042-22 |
7/8 |
0.7 |
W9042-25 |
1 |
1 |
W9042-28 |
1-1/8 |
1.5 |
W9042-32 |
1-1/4 |
2 |
W9042-35 |
1-3/8 |
2 |
W9042-38 |
1-1/2 |
2 |
W9042-42 |
1-5/8 |
3 |
W9042-45 |
1-3/4 |
3.3 |
W9042-50 |
2 |
4.3 |
W9042-57 |
2-1/4 |
6.5 |
W9042-64 |
2-1/2 |
7.5 |
|
|
 |
Recommended to be used with 6x19, 6x25, 6x29, 6x37 IPS or XIP(EIP), FC or IWRC wire rope. If using with any other type of construction or grade of
wire rope, it is recommended to make the breaking load test of the swaged termination to prove the adequacy of the assembly to be manufactured. |
|
Just one step will finish the swaging, turning the Two-Piece sleeves 90° and swaging again is not recommended. |
|
|
